Conditions
•in accordance with all safe practice guidelines.
•in accordance with procedure RP-7906.
•not to exceed a bend ration of 18 degrees.
•within +1- five percent.
•within five minutes.
•without error.
Standards
1.From memory, list the five emergency steps to recover from a stalled engine.
a.(In this statement, the condition "from memory" is stated to emphasize that the action must be performed without the aid of reference material. The standards are "understood").
2.Given a fresh whole swordfish, dress the fish within 10 minutes, with minimal wasted fish.
a.(The behavior is "dress the fish". Several standards clarify the speed and degree of proficiency required to successfully complete the objective).
3.Given the necessary tools and under actual highway conditions, replace a flat tire with a spare in the safest possible manner and without violation of applicable motor vehicle codes.
a.(This example includes conditions- tools and in actual highway conditions; a behavior- replace a flat tire with a spare; and standards- in the safest possible manner and without violation...).
Additional Example Objectives
1.Given a system drawing, name each of the components in the intake flow path.
2.Given a pictorial representation of potential development sites, including aerial photographs, area maps and surveys, choose the site that is best suited for development of a shopping mall. You must be able to defend your selection based on location, terrain and geographic considerations.
3.Given a wiring diagram and access to the air conditioning simulator panel, isolate a fault in the unit during start up. The fault must be identified within 30 minutes.
4.Given an illustration representing the process, and a scenario indicating a proposed change in drum level, predict the consequences of the proposed change on output efficiency, emissions and cost per unit.
5.Given raw data and the formula for statistical reliability, calculate "r" to within two significant digits.
6.Given different scenarios under which the system will be loaded, match the appropriate load procedure with the scenarios.
7.Given a XYZ system, load the station using the "fast cartridge" technique. The system must be fully operational and trouble free after loading.
8.Given indications of a sudden fluctuation in pressure, make the appropriate immediate/initial response using only the necessary screens, with no wasted keystrokes and within the required amount of time for alarm response as specified in TD 36.2.
9.In the F-22 simulator, configure the cockpit controls for take off. Every control must be in the correct position in accordance with FP 26.7a.
